General Microscope Accessories
General accessories for use with microscopes. Products include lens oil, lens cleaner, slide dispensers, microscope covers, vessel holders, light cubes, and flow cells.
Many parts of your microscope can be updated or replaced including microscope lamps, lenses, and eyepieces. Replacement lamps, light sources, and power cords can extend the working lives of your microscopy equipment. New or replacement objectives and lenses can help increase the total magnification available with your microscope.
Add greater magnification or exchange your eyepiece for one with a reticule to more easily estimate the sizes of the items being viewed.
Replace or update your mechanical stage or clamps or add cell culture vessel adapters to facilitate specimen positioning.
Condensers can also be replaced, and conversion kits are available to add phase contrast, polarization, fluorescence, or other capabilities to your current system.
Some microscopes can be adapted for use with still or video cameras. Look for cameras and adapters designed for your specific microscope brand. Film and documentation-related products may also be available to support your record-keeping.
Temporary, semi-permanent, and more long-term slide storage options include:
- Slide racks that securely hold slides during staining procedures
- Folding fiberboard or plastic slide holders with horizontal indentations that keep microscope slides in place
- Slide storage boxes with vertical dividers; made from fiberboard, plastic, and wood and available in multiple sizes
- Slide holders and mailers for transporting slides safely
- Slide storage systems and cabinets for large quantities of slides or archival storage
Electron Microscopy Sciences AMD-FH Microscope Workstation, 120 x 75 cm, Ferromagnetic SS Surface
These isolation tables support most of the larger microscopes and their support equipment. The air isolation platform effectively removes most removes most vibrations. The rigid frame has levelling feet which ensure the table is in excellent contact with the floor. The damped rolling diaphragm isolators have a low natural frequency of 2Hz which effectively isolates out vibrations above 6Hz, well below the frequencies at which typical building vibrations begin to occur. Full Active table with self-levelling and platform guards.
Size: 120 x 75 cm
Surface: Ferromagnetic SS
Type: Active Air Self Leveling
Electron Microscopy Sciences AMD-SM Microscope Workstation, 75 x 75 cm, Stainless Steel Surface
Microscope workstations featuring a unique Sorbothane isolator design removing up to 98 percent of unwanted vibrations.
Size: 75 x 75 cm
Surface: Stainless Steel
Electron Microscopy Sciences AMCU High Load Anti-Vibration Platform with Stainless Steel Surface 75 x 90 cm
High Performance anti-vibration platforms for instruments. The seamless design and stainless steel featured in the AMCU series makes these platforms ideal for use in laboratories and cleanrooms. Integrated cushion air isolators remove 95% of vibrations. These platforms are specifically designed for high load applications and will support weights up to 1000kgs. Typical applications include large spectrometers, high-load weighing machines, and material testing machines.
Size: 75 x 90 cm
Surface: Stainless Steel
Electron Microscopy Sciences AMD-MP Microscope Workstation, 120 x 75 cm, Surface
These isolation tables support most of the larger microscopes and their support equipment. The air isolation platform effectively removes most removes most vibrations. The rigid frame has levelling feet which ensure the table is in excellent contact with the floor. The damped rolling diaphragm isolators have a low natural frequency of 2Hz which effectively isolates out vibrations above 6Hz, well below the frequencies at which typical building vibrations begin to occur. Simply pumped up via cycle valves. Full width table guards.
Size: 120 x 75 cm
Type: Active Air Self Leveling
Electron Microscopy Sciences AMD-MA Microscope Workstation, 120 x 75 cm, Stainless Steel Surface
These isolation tables support most of the larger microscopes and their support equipment. The air isolation platform effectively removes most removes most vibrations. The rigid frame has levelling feet which ensure the table is in excellent contact with the floor. The damped rolling diaphragm isolators have a low natural frequency of 2Hz which effectively isolates out vibrations above 6Hz, well below the frequencies at which typical building vibrations begin to occur. Features an active 35x55cm isolation area and full width table guards.
Size: 120 x 75 cm
Surface: Stainless Steel
Type: Active Air Self Leveling
Electron Microscopy Sciences Standard Pin SEM Stub Mini, 6.6 x 1.3 mm Head, 9.5 mm Pin, Copper
Mini SEM pin stub mount for Cambridge, Leica, ZEISS/LEO, FEI/Philips, CamScan, Tescan, ETEC and Amray. Made from lathe finished ultra-pure aluminum.
Head: 6.6 x 1.3 mm
Pin height: 3/8"
Electron Microscopy Sciences Evactron Adapter Flange JEOL, 88 mm, 45 mm O-ring ID
Evactron adaptor flanges are identified by physical dimensions of the blank plate in the SEM/FIB. ORID is a measurement of the inner diameter of the O ring. 90 mm long nipple.
Size: 88 mm
O-ring ID: 45 mm
BC: 79 mm
Mounting holes: 4 ASYM
Electron Microscopy Sciences Evactron Adapter Flange JEOL, 154x204 mm
Evactron adaptor flanges are identified by physical dimensions of the blank plate in the SEM/FIB. ORID is a measurement of the inner diameter of the O ring.
Size: 154 x 204 mm
Mounting holes: 4 ASYM
Electron Microscopy Sciences Shorter Pin SEM Stub Slotted 38 mm head with 6 mm Pin, Aluminum, 1/8" Pin diameter
SEM stub specimen mount with shorter pin (6 mm) and 38 mm slotted head for use with Zeiss/LEO scanning electron microscopes, FE-SEMs & FIB systems. Made from ultra-pure aluminum with a standard lathe finish.
Head: 38 mm
Pin height: 6 mm
Pin diameter: 1/8"
Electron Microscopy Sciences Shorter Pin SEM Stub Slotted 1-1/4" head with 6 mm Pin, Aluminum, 1/8" Pin diameter
SEM specimen mount with shorter pin and slotted head for use with Zeiss/LEO 1500 SEM, FESEM & FIB systems. Made from ultra-pure aluminum with a standard lathe finish.
Head: 1-1/4"
Pin height: 6 mm
Pin diameter: 1/8"
Electron Microscopy Sciences SEM Hitachi Mounts Rectangular 11 mm x 5.5 mm, 5.5 mm height
Rectangular SEM specimen mounts for use with Hitachi S-5200/S-5500/SU-9000. Made from ultra-pure aluminum. Available in 11 mm x 5.5 mm with 2, 3.5, 5 or 5..5 mm height.
Size: 5.5 mm
Electron Microscopy Sciences Evactron Adapter Flange HITACHI, 57 mm, 34.5 mm O-ring ID
Evactron adaptor flanges are identified by physical dimensions of the blank plate in the SEM/FIB. ORID is a measurement of the inner diameter of the O ring.
Size: 57 mm
O-ring ID: 34.5 mm
BC: 50 mm
Mounting holes: 4
Electron Microscopy Sciences SEM Specimen Prep-Stand; Multi-Angle
A SEM specimen preparation stand with the ability to hold pin mounts on a 45° angle as well as in a vertical and horizontal direction. The stand, which is made from Aluminum, comes complete with screws that are used to secure the mount during preparation. Both 0.5" (12.7 mm) and 1" (25 mm) mounts can be accommodated on the stand. Measures: 2.75" ( 70 mm) x 2" (50 mm) x 1.6" (40 mm).
Electron Microscopy Sciences Globe White Glass Charged Slides, 90° Ground Edge, Corner, Lilac Frosted Label
Produced from the finest quality optical white glass, these charged microscope slides provide the ideal surface for cell and tissue adhesion. They are ideal for use in histology, cytology and pathology departments, where the convenience of an adhesive slide saves the user time and money. The slides are pre-cleaned and ready to use. Dimensions: 25 x 75 mm. Thickness: 1-1.2 mm
Edge: 90° Ground
Label: Lilac Frosted
Electron Microscopy Sciences Formvar/Carbon Support Film 3-4 nm/20-30 nm thick on 2X1 mm Slot Grid Gold Grid
A formvar coated grid, stabilized with evaporated carbon film. This type of coating is excellent for specimen support, especially for ultra thin sections. Coated grids are optically checked followed by batch testing in the electron microscope. Packed in grid storage box. NOTE: All film is laid on the shiny side of the grid. Formvar is 5 to 6 nm thick with a 3 to 4 nm carbon coating.
Grid: Gold